Supreme Pull-Type Vertical Mixers
At Hanlon Ag Centre, we offer Supreme pull-type vertical mixers built for the demands of Southern Alberta cattle operations. Whether you’re feeding a cow-calf herd, backgrounding cattle, or running a dairy, these mixers are designed to deliver consistent rations, durability, and low maintenance in tough conditions.
Deliver Your Herd a Complete Ration
Supreme feed mixers are able to process entire bales and forage easily and without losing the quality of feed. The mixers cut feed at uniform lengths to prevent cows from sorting, therefore delivering a complete ration to your herd.
Built for Tough Canadian Feeding Conditions
Supreme pull-type mixers are engineered with a heavy-duty two-stage planetary drive system and robust gearbox. This design ensures reliable performance when processing tough feed ingredients like hay, silage, and baleage.
- No chains, sprockets, or countershafts – fewer moving parts means less downtime
- Heavy-duty tubular steel frame for long-lasting durability
- Built-to-order design with customizable options to match your operation
- Independent steel oil reservoirs for improved component life
Consistent Mixing Performance
Supreme mixers use patented freestanding vertical augers designed to deliver uniform feed mixing while maintaining forage structure. Replaceable cutting blades ensure efficient processing of all feed types.
- Single and twin auger configurations available
- Replaceable forage cutting blades for long-term efficiency
- Manual restrictor plates to control feed flow
- Ultra wear kicker plates to extend mixer life
Operator-Friendly Features
These mixers are designed with the operator in mind, offering practical features that improve efficiency on the yard.
- 4-point scale system for accurate ration management
- Front centre discharge with conveyor options
- Viewing platform for safe monitoring
- Removable hitch jack for convenience
- 12-volt battery system
Wide Range of Sizes for Any Operation
From smaller operations to large-scale feedlots, Supreme offers a wide range of pull-type mixer capacities.
- Struck capacities from 231 ft³ to 1,152 ft³ (6.5 m³ to 32.6 m³)
- Payload capacities from 6,000 lbs to 40,000 lbs (2,722 kg to 18,144 kg)
- Horsepower requirements from 50 HP to 230 HP (37 kW to 172 kW)
Choose Your Auger Configuration
| Type | Best For | Key Benefit |
|---|---|---|
| Single Auger | Smaller herds | Simple, cost-effective feeding solution |
| Twin Auger | Most farm operations | Faster mixing and increased capacity |
| Triple Auger | Feedlots and large operations | High-volume mixing and heavy ration capability |
Click Here to View Sizing Specs Below
Choose Your Mixer Model
| Model Type | Basic Idea | Best For | Duty Level |
|---|---|---|---|
| LD (Light Duty) | Entry-level mixer with standard materials and simpler build. | Smaller herds or occasional feeding | Light to standard use |
| SD (Standard Duty) | More durable with upgraded materials for everyday reliability. | Typical cow-calf or dairy operations | Standard to high use |
| HD (Heavy Duty) | Reinforced design with liners and heavier components for longer life. | Larger operations and tougher rations | High use |
| XD (Extreme Duty) | Maximum durability with heavy liners and extreme-duty components. | Feedlots or very demanding, continuous use | Extreme use |
Click Here to View Additional Mixer Specs Below
CLICK HERE TO EXPLORE SUPREME’S CUSTOMIZATION OPTIONS
Get a Quote Today
Looking for a reliable feed mixer that can handle Alberta conditions? Contact Hanlon Ag Centre in Lethbridge today to learn more about Supreme pull-type vertical mixers and find the right model for your operation.
Supreme International is Made In Canada • Wetaskiwin, Alberta
LD, SD, HD & XD Mixer Series Explained
Supreme vertical mixers are available in multiple duty classes to match the scale and demands of your operation. From smaller cow-calf herds to large commercial feedlots, each series is engineered to deliver the right balance of durability, performance, and longevity.
LD (Light Duty) Mixers
Designed for light to standard duty cycles, LD mixers are a strong fit for smaller operations or producers looking for a cost-effective entry into vertical mixing.
- Mild steel tub walls
- Mild steel augers
- Supreme knives and backing plates
- Robust planetary gears
- Available in pull-type models only
SD (Standard Duty)
Mixers Built for standard to high daily use, SD mixers are one of the most versatile options for cow-calf and dairy operations that require consistent performance.
-
- Abrasion resistant tub walls
- Abrasion resistant augers
- Supreme knives and backing plates
- Oversized planetary gears
- Optional upgrades available including auger hard facing and hard-faced tub components
- Available in pull-type, truck mount, and stationary models
HD (Heavy Duty) Mixers
Engineered for high to extreme duty cycles, HD mixers are ideal for larger herds and operations running longer or more demanding mixing cycles.
- Abrasion resistant tub walls with 3mm 3CR12 wall liner
- Abrasion resistant augers
- Heavy-duty knives
- Supreme backing plates
- Oversized planetary gears
- Optional upgrades including stainless steel lined augers and tub floor liners
- Available in pull-type, truck mount, and stationary models
XD (Extreme Duty) Mixers
Built for the most demanding feeding operations, XD mixers offer maximum durability and are designed for large-scale commercial feeding environments.
- Abrasion resistant tub walls with 5mm 3CR12 wall and floor liners
- Xtreme duty augers
- Heavy-duty knives and backing plates
- Oversized planetary gears
- Auger magnets
- Optional upgrades including hard-faced or stainless steel lined augers
- Available in pull-type, truck mount, and stationary models
Choosing the right duty class ensures your mixer is built to handle your feeding frequency, ration type, and herd size—helping reduce wear, maintenance, and downtime over the long haul.Which Mixer Series is Right for You?Choosing the right Supreme vertical mixer comes down to how often you feed, the type of ration you’re mixing, and the size of your operation. Use this quick guide to match the right duty class to your needs.Quick Selection GuideHow to Choose
- Feeding once per day or less? LD or SD is typically sufficient.
- Running multiple loads per day? Step up to SD or HD for added durability.
- Processing tough rations like long-stem hay or baleage? HD or XD will handle wear better.
- Operating at feedlot scale? XD is built for continuous, high-volume feeding.
Still unsure? The team at Hanlon Ag Centre can help match the right mixer to your operation based on herd size, ration type, and daily workload.Why Buy a Supreme Mixer from Hanlon Ag Centre?When you invest in a Supreme mixer from Hanlon Ag Centre, you’re getting more than just equipment—you’re getting local expertise and support tailored to Southern Alberta producers.
- Expert advice to match the right mixer to your operation
- Built-to-order configurations to fit your feeding program
- Local parts and service support to keep you running
Mixer Model Comparison
Supreme Pull-Type Mixer Model Comparison
Available in single, twin, and triple auger configurations, Supreme mixers scale from smaller cow-calf operations to large commercial feedlots.
| Model | SINGLE AUGER | Struck Capacity
(w/extension) |
Max Payload | Horsepower Required |
|---|---|---|---|---|
| 300 | Single Auger | 275 ft³ (7.8 m³) | 6,000 lbs (2,722 kg) | 50 HP (37 kW) |
| 400 | Single Auger | 378 ft³ (10.7 m³) | 10,000 lbs (4,536 kg) | 60 HP (45 kW) |
| 500 | Single Auger | 459 ft³ (13.0 m³) | 14,000 lbs (6,350 kg) | 100 HP (75 kW) |
| 600 | Single Auger | 534 ft³ (15.1 m³) | 14,000 lbs (6,350 kg) | 100 HP (75 kW) |
| Model | TWIN AUGER | Struck Capacity (w/extension) |
Max Payload | Horsepower Required |
| 500T | Twin Auger | 555 ft³ (15.7 m³) | 14,000 lbs (6,350 kg) | 80 HP (60 kW) |
| 600T | Twin Auger | 635 ft³ (18.0 m³) | 14,000 lbs (6,350 kg) | 100 HP (60 kW) |
| 700T | Twin Auger | 649 ft³ (18.4 m³) | 14,000 lbs (6,350 kg) | 100 HP (75 kW) |
| 800T | Twin Auger | 745 ft³ (21.1 m³) | 18,000 lbs (8,165 kg) | 130 HP (97 kW) |
| 900T | Twin Auger, Single Axle | 841 ft³ (23.8 m³) | 24,000 lbs (8,165 kg) | 130 HP (97 kW) |
| 900T | Twin Auger, Tandem Axle | 841 ft³ (23.8 m³) | 24,000 lbs (10,886 kg) | 130 HP (97 kW) |
| 1000T | Twin Auger | 897 ft³ (25.4 m³) | 40,000 lbs (18,144 kg) | 170 HP (127 kW) |
| 1200T | Twin Auger | 1,075 ft³ (30.4 m³) | 40,000 lbs (18,144 kg) | 180 HP (134 kW) |
| 1400T | Twin Auger | 1,305 ft³ (37.0 m³) | 40,000 lbs (18,144 kg) | 230 HP (172 kW) |
| Model | TRIPLE AUGER | Struck Capacity
(w/extension) |
Max Payload | Horsepower Required |
| 1500TR | Triple Auger | 1,305 ft³ (37.0 m³) | 40,000 lbs (18,144 kg) | 230 HP (172 kW) |
| 1700TR | Triple Auger | 1,305 ft³ (37.0 m³) | 40,000 lbs (18,144 kg) | 230 HP (172 kW) |
| 1900TR | Triple Auger, Tandem Axle | 1,873 ft³ (53.0 m³) | 60,000 lbs (27,216 kg) | 250 HP (186 kW) |
| 1900TR | Triple Auger, Tridem Axle | 1,875 ft³ (53.0 m³) | 60,000 lbs (27,216 kg) | 250 HP (172 kW) |